how to make oil burner pipe at home

    What if you don't have any money ? and you have a medical problem,    glass oil burner pipe arnt cheap, some local shop selling them for like $20 each,  there also some cheap ones out there, but the quality , if there any quality to speak, so ,how ?if you desperate want to light up something to heal ?

       So, what do you do ? sitting in home, here creating an oil burner pipe at home involves repurposing some materials you might already have. However, it's crucial to prioritize safety and legality in your creations. Here's is a basic method that I can share with you by using a glass tube, which is legal for use with essential oils and legal substances,. Always ensure your actions comply with local laws and regulations before you start it, .

Materials Needed:

• A small, thin glass tube, or glass rod,most the time you can find on Amazon, or if you have high degree torch, you can liquid up your glass mug or something, to prepare the glass materials,  (like those used for scientific purposes or found in certain types of packaging)
• Sandpaper< if you dont have sandpaper you can use some stone with flat surface, it work same but take little time, (for smoothing edges)
• A heat source , a torch lighter is highly recommend(like a lighter)
• Protective gloves and eyewear goggle, a regular sunglass works too, just becaure to stay far from the heat souce,

• 

  5" Oil Burner Water Pipe — Skip the DIY hassle with a professionally made oil burner pipe.

Steps:

1. Prepare the Glass rod or tube:

   • check  the glass tube for any cracks or weaknesses.
   • If one end of the tube is sealed, heat that end with your heat source until it becomes soft, then use a metal tool to carefully open it up( you can use a pen without the inserts, and insert into the glass rod and blow it with your mouths, to create the bowl,.
   • Smooth both ends of the glass tube with sandpaper to prevent cut  your finger or hand.

2. Shape the Bowl:

   • Heat a wider section of the tube , or the middle area,(not the end you intend to use as the mouthpiece) until it becomes malleable.
   • Gently press the heated section on a heat-resistant surface to slightly flatten it. This will be the bottom of your bowl.
   • Allow it to cool and solidify.

3. Create the Bowl Opening:

   • In the flattened section, heat a small spot until it's malleable.
   • Use a pointed tool to pierce a hole through the heated spot. This will be where you place the oil.

4. Final Touches:

   • Ensure all surfaces are smooth and free of sharp edges.
   • Clean the pipe thoroughly to remove any glass particles or residue from the heating process.

Safety and Legal Considerations:

• Always wear protective gloves and eyewear when working with glass and heat.
• Only use this pipe for legal substances.
• Be aware of the laws in your area regarding the creation and possession of smoking devices.

         to creating glass objects at home carries risk, it just not easy, if your not that kidn home handyman type person, i wouldnt suggest you try it, particularly from shattered glass or burns. Consider purchasing a professionally made oil burner pipe for safer use. This guide is for informational purposes and should be followed with caution.